®1. Work in progress
Thanks to the low power mode we have developed, the watch does not have to be switched on or off, it is still in sleep mode. Just press the physical button on a metal envelope to make the watch wake up.
The included USB cable should be plugged into the back of the watch in place of gold pogo pins. The watch has magnets, thanks to which it will work properly 🙂
After the option “Connect to USB?” Choose YES if you want to upload data to the watch using the Draverik Office program or NOT if the watch is to be charged and act at the same time.
After connecting the watch to the computer, a new disk will appear on your computer. It can contain folders and files, you can not delete or modify them. Upload data to the watch using Draverik Office according to the instructions below in the “Draverik Office” section.
After pressing the physical button the watch will wake up or go into sleep mode.
Hold the finger for 2 seconds in the middle of the screen, the window for selecting the dials will appear. Then, moving and releasing your finger left or right, select your shield so that it is in the middle of the screen. Tap on the screen to make a selection.
Swipe from right to left from the level of the clock face. The main menu of the watch will open.
“Tap” on the screen in place of the application you are interested in. Subsequent updates will be added in free updates.
Not all options in the settings are currently available. Navigate by sliding your finger from bottom to top or vice versa and choose by tapping the screen in the position you are interested in.
From the level of the clock face, slide your finger from bottom to top. The password entry screen will appear. The default password is 0000. After entering the correct password, the student menu will appear (if you enter the password incorrectly, try entering the numbers again so that the fields will be reset). The password will be changed in Draverik Office.
You can choose from:
From the student menu, tap on the document you are interested in and navigate.
Swiping your finger from bottom to top and vice versa the document will follow you.
If you want to enlarge the picture with the zoom function (document Econometrics -> scroll down until you see the spreadsheet) tap the screen quickly 2x. Repeat the operation until the maximum magnification. To reduce the image, keep your finger on the screen. Repeat the operations until you return to the image without zooming. Navigate vertically or horizontally by moving your finger in a given direction.
When you browse the document and hold down the physical button for 1.5 seconds, the student menu will open.
To go from the displayed documents to the digital clock press the physical button on the metal watch envelope.
Hold the II button for 1.5 seconds to open the student menu.
To go up or down in the student’s menu, click the I button or the III button.
To select the item you are interested in, simply click 1x on the II button. In the settings via button I or III you change the value, by pressing the button II you accept it. Holding down the II button will return without saving.
Click 1x on the II button to select the document.
To move the document up or down, press and hold the I or III button. A longer hold will cause the document to scroll faster. To change the scrolling speed, go to the student settings and select the “scrolling speed”.
If you want to enlarge the picture with the zoom function (document Econometrics -> scroll down until you see the spreadsheet): Press 1x button II. The icon (+ -) appears. Press I or III to zoom in or out to decrease.
Press 1x on the II button to move left or right (<>)
Tap 1x on the II button to move up or down (/ \ /)
To return to the document without zooming press the 1x button II to change to the option to zoom in or out and reduce the picture by pressing I or III to the default size.
To display the clock face, press the II button twice quickly. Another 2x pressing the II button will redirect you back to the viewed document.
When you press the I button from the level of the clokface , the table of contents of the last viewed document will be displayed.
After holding the II button on the pen, the student menu will open. To return, press the II button again for 1.5s. The back option applies to all settings.
Download the program at this link:
After starting the program, enter the code that you have received in your mailbox. Draverik Office must be activated within a week of receiving the watch.
Click “New Document” and enter its name.
Type or paste text into the window (choose font size, background color and text itself). We’re working on adding features every day.
The first applications are now available, others will be added in free updates.
Do not immerse the equipment in water or keep it submerged. Do not expose the device to water moving at high force.When carrying equipment do not swim or bath. In case of contact of devices with clean water, wipe them thoroughly with a clean soft cloth. If the device comes into contact with another liquid, for example sea water, ionized water or alcoholic drink, clean it with a clean damp cloth and wipe with a clean, dry cloth. Failure to follow these instructions may adversely affect the operation or appearance of the device. The touch screen and other functions may not work properly if the device has been in contact with water.
Only use chargers, batteries and cables approved by Draverik. Use of unapproved chargers or cables may cause battery explosion or damage to your Draverik watch or pen. Use the docking station and cable from the set. Improperly connecting the charger can cause serious damage to the device. No damage resulting from improper handling is not covered by the warranty. The clock has a 300 mAh lithium polymer battery, while the pen has two AAAA batteries that can not be charged. If you leave the watch unused for 3 months, please charge it .
Unscrew the top end of the ballpoint pen finished with a thread. Then pull out the used cartridge.
Unscrew the tip of the pen tipped with a nib (note, hold the metal part when unscrewing). It is very important to tighten the end of the pen after replacing the battery. Insert the batteries so that + is from the side of the part to be removed.